Chapter 6: Peripheral Devices & 8515 Installations
Component Part Numbers
118
Psion Teklogix 8515 Vehicle-Mount Computer User Manual
ance. Note also that for better protection, the equipment should be mounted
inside the vehicle roll cage.
Use of the Powered Fork Lift Cradle while charging the fork truck battery
is prohibited.
6.4.1 Component Part Numbers
The table below lists the mounting component part numbers.
Important: Safeguards
To avoid possible injury, this device must be properly secured when in a
moving vehicle.
Keep this device away from magnetic fields.
Do not place the computer near a television or radio receiver.
Do not disassemble your 8515 computer—there are no user-serviceable
parts inside.
Table 6.1 Mounting Components and Figure Legend
Figure Legend
Description
Psion Teklogix
Part Number
A
8515 Vehicle-Mount Computer
B
RAM Vesa Base
9001934
C
Washer M8 Internal Tooth
9008800
D
Screw M8 x 12 Pan Head
9004517
E
RAM Standard Arm
9001805
F
RAM Circular Base
9001804
G
Screw M8 x 25 Pan Head
9004518
H
Screw M8 x 25 Flat Head
9004522
J
Nut M8 x 1.25
9008801
L
Mounting Kit MT3505 (Clamp base (for 4" or 12" RAM arm,
2" max. width)
9007505
M
Mounting Kit MT3507 (Clamp base (for 4" or 12" RAM arm,
3" max. width)
9007507
Summary of Contents for Vehicle-Mount Computer 8515
