Psion Teklogix Vehicle-Mount Computer 8515, User Manual

Page: 111 / 190

Chapter 5: Configuration
Active Connections Tab
Psion Teklogix 8515 Vehicle-Mount Computer User Manual 85
5.6.4 Active Connections Tab
Figure 5.40 Active Conn. Tab
The Active Conn. tab lists the Name , Address , and Type of the currently active connections.
The table is periodically updated while on display, but it can take a few seconds before it re-
flects the actual list of connections. The
Type column of the table shows ‘ACL’ or ‘SCO’.
The Connection list table shows the connections for scanning and the service connections.
Note: To add a service to the Outgoing port, an active service must first be deacti-
vated. Then you can choose the ‘Outgoing’ option from the Activation menu
(highlight a service, right-click or press the [SPACE] bar to display the Acti-
vation menu).
Note: You can change the device-name and description of your radio by clicking on
the System icon in Control Panel , which will open the System Properties
dialog box. Click on the Device Name tab to access the menu and change
your settings. Then click on OK .
Although the name will have changed in the Properties menu in Bluetooth
Controls, the radio only reads it on boot-up. For the changes to take effect,
you must reset the 8515.