Psion Teklogix Vehicle-Mount Computer 8255, User Manual, Page: 42 / 348

Chapter 2:Assembly And Basic Operation
The Battery Pack – Removing And Installing
16
Teklogix 7035, 8255 & 8260 Terminals User Manual
Warning: When a battery is removed from the terminal, a backup of the
system, application and any work in progress is maintained for
up to 10 minutes. A fresh battery must be installed within this 10
minute time frame. THIS BACKUP WILL NOT FUNCTION
UNLESS THE TERMINAL IS TURNED OFF BEFORE THE
BATTERY IS REMOVED. Removing the battery while the unit is
operating will result in a full reboot.
Even after the system backup has expired, the date and time are
maintained for 100 hours without a battery.
To remove the battery pack:
• Turn the terminal upside down (antenna pointing down).
• Grasp the unit around the keypad area with your forefinger resting on
the battery release button.
The battery release button is located at the base of the terminal, just above the
28-pin port.
• Press the button until the battery unlatches.
Figure 2.1 Battery Compartment Of The 7035 Terminal
To install the battery pack:
• Insert the battery pack with the textured plastic facing you. Click the battery
into place.
Battery Release
Button