Psion Teklogix Vehicle-Mount Computer 8255, User Manual, Page: 195 / 348

Teklogix 7035, 8255 & 8260 Terminals User Manual
169
Chapter 7:Setting Parameters
Scanner
AutoRep T/O
This parameter determines the time (in seconds) between the terminal unlocking
and the next transmission of the function key specified by the “AutoRep Fn”
parameter. A value of zero disables auto reply mode.
7.7.2.6 Scanner
ContNxtField
This parameter only applies to string entry data. When enabled (set to “Y”), this
parameter allows bar codes that are longer than the field length to continue in the
next field.
If “ContNxtField” is disabled (set to “N”) OFF data will flow into the next field.
Append Enter
When enabled (set to “Y”), “Append Enter” causes an <ENTER> code to be
appended to the bar code. The <ENTER> code completes the entry of the bar code
and moves the cursor to the next field.
Append F0
When enabled (set to “Y”), this parameter causes an <F0> code to be appended to
the bar code. The <F0> code completes the entry of the bar code data in the field.
Mixed AIAG
When this parameter is enabled (set to “Y”), AIAG labels are always accepted and
processed – even if mixed with keyboard input. The AIAG label can replace the
partially entered keyboard data. If this parameter is disabled, AIAG labels are
rejected if field entry is in progress.
ContNxtField Y Y/N
Append Enter Y Y/N
Append F0 Y Y/N
Mixed AIAG N Y/N
Rjct if Alpha N Y/N
Beam Lockout N Y/N
Range
Scanner