Psion Teklogix Vehicle-Mount Computer 8255, User Manual, Page: 187 / 348

Teklogix 7035, 8255 & 8260 Terminals User Manual
161
Chapter 7:Setting Parameters
Screen
Settings
Note: The “Settings” sub-menu is only available when
9010t
is selected as the
“Conn Type”.
Host
This parameter is used to assign a host IP address using the format ###.###.###.###
Port
“Port” specifies the 9010t (TCP Direct) port number. By default, the 9010t port is
assigned the value 9999.
7.7.2.2 Screen
Columns
This parameter defines the logical page width (in characters) used by the host
computer application. Emulator systems trim the host application screens to this
width. This page width cannot be smaller than the width of the terminal display.
Display panning is used if the page is wider than the display.
Note: The value in this parameter must be an even number.
Host see text
Port 9999 0-9999
Range Settings
Columns
80
20..132
Rows 24 4..60
Scroll Mode Normal Normal, Field, Origin
Pages Saved 16 1..16
App. Parameter -1 -1..79
Font Size 18x20 see text
Cursor Type Underline Underline, Block
Softkeys » see text
Range Screen