Psion Teklogix Vehicle-Mount Computer 8255, User Manual, Page: 184 / 348

Chapter 7:Setting Parameters
Serial
158
Teklogix 7035, 8255 & 8260 Terminals User Manual
Insert
When this parameter is enabled (set to “Y”), the keyboard operates in insert mode.
In insert mode, the graphic symbol of a graphic character, or a control function for
which graphical representation is required is inserted at the cursor.
If the “Insert” parameter is disabled (set to “N”), the keyboard operates in replace
mode. In replace mode, the graphic symbol or control function replaces (or,
depending upon the implementation, is combined with) the graphic symbol at the
cursor.
Newline
When this parameter is disabled (set to “N”), a LF character received from the host
causes the cursor to move down one line in the same column. In addition, the
<ENTER> key transmits a CR. When enabled (set to “Y”), an LF character received
from the host causes the cursor to move to the first column of the next line. The
<ENTER> key transmits both a CR and an LF.
DEC Cursor Keys
This parameter can be set to either
Cursor Mode
or
Appl. Mode
. Cursor Mode
causes the cursor keys to generate ANSI cursor control sequences. Application
Mode causes the cursor keys to send application control functions.
7.7.1.6 Serial
Async In
When this parameter is enabled (set to “Y”), the serial (async) port is ready to
receive input at all times.
Async In N Y/N
Exclusive Y Y/N
Start 0 0-255
End 0 0-255
Serial
Range