Psion Teklogix Vehicle-Mount Computer 8255, User Manual, Page: 169 / 348

Teklogix 7035, 8255 & 8260 Terminals User Manual
143
Chapter 7:Setting Parameters
Code 11
7.6.3.9 Code 11
1 Chk Digit
If this parameter is enabled (set to “Y”), it is assumed that the last digit is a
check digit.
2 Chk Digits
If this parameter is enabled (set to “Y”), it is assumed that the last two digits are
check digits.
Include Chk
If “Include Chk” is enabled (set to “Y”), the check digit is included with the
decoded bar code data.
Size/Chars
See “Size/Chars” beginning on page 136.
7.6.3.10 I 2 of 5
Mod 10 Chk
If this parameter is enabled (set to “Y”), the Mod 10 check digit is calculated.
This calculation is the same as the Code 39 Mod 10 check digit.
ITF Chk
If this parameter is enabled (set to “Y”), the ITF-14/16 Mod10 check digit
is calculated.
1 Chk Digit N
2 Chk Digits Y
Include Chk N
Size/Chars »
Code 11
Mod 10 Chk N
ITF Chk N
Include Chk N
Size/Chars »
I 2 of 5