Psion Teklogix Vehicle-Mount Computer 8255, User Manual, Page: 125 / 348

Teklogix 7035, 8255 & 8260 Terminals User Manual
99
Chapter 5:TESS Operations
Control Commands
5.7 Control Commands
A group of <CTRL> key commands can be used within TESS to dictate how the
terminal will operate under a variety of conditions.
• <CTRL> p – Reprints the last print page sent from the host. This key
combination will not print anything if a print page from the host was not
previously received at the terminal.
• <CTRL> s – Displays the terminal status continuously. Below is a sample
status line as it might appear at the bottom of your terminals screen:
Lock-B/Lock-H fld enh “ application name”
• <CTRL> w – Displays the terminal status when the terminal is in “Lock B”
or “Lock H” mode. The status line would be similar to the sample above.
• <CTRL> t – Displays the terminal status with the terminal number instead
of the name.
Lock-B/Lock-H rep “ terminal nn”
• <CTRL> h – Displays a menu of available hosts.