Psion Teklogix Vehicle-Mount Computer 8255, User Manual, Page: 109 / 348

Teklogix 7035, 8255 & 8260 Terminals User Manual
83
Chapter 4:Tekterm
Introduction
4.1 Introduction
Tekterm is a Teklogix DOS application resident on the 7035, 8255 and 8260
terminals. It provides real-time terminal emulations that are compatible with
Teklogix RF/DC systems.
The Tekterm application allows the terminal operator to run up to four TESS
and/or ANSI sessions. This application accepts input from the terminal keyboard
or from a serial device such as a scanner and provides output to a serial device
such as a printer.
4.2 Launching Tekterm
Note: Normally, the Tekterm application is automatically launched when the
terminal is turned on
If Tekterm is not already running on your terminal, you can launch it from the start-
up “Display Menu”.
Tekterm is launched through the “Emulations” menu. To launch Tekterm:
• Type the letter ‘b’.
A Parameters
B Emulations
C DOS Prompt
01 Display Menu