Chapter 5: Configuration
Display Properties
Psion Teklogix NEO Hand-Held Computer User Manual
79
Intensity
This parameter is used to adjust the light intensity of the backlight. Sliding the bar to the left
lowers the light intensity, and sliding it to the right raises the intensity.You can also adjust
the backlight directly from the keyboard by pressing [FN/BLUE] followed by the [LEFT] or
[RIGHT] arrow keys to increase or decrease the backlight intensity.
Bright For
The value chosen from this drop-down menu determines the duration of time that the back-
light stays on at the configured intensity after the last user action (keypress, scan trigger).
Dim For
The value chosen from this drop-down menu determines the duration of time that the back-
light stays on at half the configured intensity (dimmed backlight) after expiration of the
Bright For
delay and as long as no user action takes place (such as a keypress or scan trig-
ger). At the expiration of the
Dim For
duration, the display backlight shuts off.
External Power Checkbox
When you select the checkbox next to
When using external power keep the backlight always
ON
, the backlight remains on at the configured intensity when NEO is operating with exter-
nal power (not battery power). If NEO is drawing power from its battery, this option is
ignored and the other parameters defined in
Display Properties
dialog box are used.
5.5.1.2 Display Appearance
•
In the
Display Properties
dialog box, open the
Appearance
tab.
