Psion Teklogix PX750 User Manual Download Page 108

Page: 108 / 278

Chapter 5: Configuration

Stylus Properties

Psion Teklogix NEO Hand-Held Computer User Manual

5.5.4.5 Devices

This tab controls power to the SDIO slot. A checkmark in the checkbox next to SDIO indi-
cates this option is enabled. If you make a change, tap on

Apply

to save your change.

5.5.4.6 Built-in Devices

The

Built-In Devices

tab allows you to enable (provide power) or disable (terminate power)

to the device(s) installed in your unit. Keep in mind that the content of this screen varies de-
pending on the devices installed. Tapping on

activates your selections.

5.5.5

Stylus Properties

•

In the

Control Panel

, choose the

Stylus

icon.

Summary of Contents for PX750























































































































































































































































































Search results

Summary of Contents for PX750

Reviews:

Psion Teklogix PX750, User Manual, Page: 108 / 278

Search results

Summary of Contents for PX750

Reviews: