Chapter 4: Windows Embedded CE 6.0
Shutdown
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
73
Figure 4.8 Shell Switch to Windows Classic Shell Desktop
4.5.2
Shutdown
Turning off Omnii places the hand-held into a power-saving
suspend
state. In this state, all
radios remain on, but the display, keyboard backlight and processor are switched off. When
Omnii is turned on from this state, operation resumes within a few seconds in the screen in
which you were working prior to suspend.
•
Press the [FN] key, and then press the [ENTER/Power] key.
Important: If the word ‘FN’ is displayed underlined in the taskbar area at the bottom
of the screen, this key is locked “on” and Omnii will not switch off. Press
the [FN] key twice followed by [ENTER/Power] to switch Omnii off.
However, if you’ve set the mode to “Lock” (see “Keyboard One Shot
Modes” on page 95), Omnii can be turned off even when the [FN] key is
locked ‘on’.
Note: If your Desktop is switched to the Windows Classic Shell, the unit will display a
shutdown options screen before turning off (see “Switching Omnii On and Off” on
