Chapter 3: Getting To Know Your Omnii
Uploading Data in a Docking Station
50
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
3.6
Uploading Data in a Docking Station
The Desktop Docking Stations allow your hand-held to upload transaction data to a server
computer when a radio link is not available. When Omnii is properly inserted in a docking
station, a dock icon is displayed in the taskbar at the bottom of the unit screen. For detailed
information, refer to “Desktop Docking Stations - Models ST4002 and ST4003” on
page 180. Review the documentation provided with the user application installed in your
Omnii before performing data uploads.
3.7
General Maintenance
3.7.1
Caring for the Touchscreen
The touchscreen is covered with a thin, flexible polyester plastic sheet with a conductive
coating on the inside. The polyester can be permanently damaged by harsh chemicals and is
susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or
cut the plastic, or crack the internal conductive coating. The chemicals listed below must not
come into contact with the touchscreen:
•
mustard
•
ketchup
•
sodium hydroxide
•
concentrated caustic solutions
•
benzyl alcohol
•
concentrated acids
If the touchscreen is used in harsh environments, consider applying a disposable screen pro-
tector (ST6112). These covers reduce the clarity of the display slightly but will dramatically
extend the useful life of the touchscreen. When they become scratched and abraded, they are
easily removed and replaced.
3.7.2
Cleaning Omnii
•
Use only mild detergent or soapy water to clean the hand-held unit.
Important: Do not immerse the unit in water. Dampen a soft cloth with mild detergent
to wipe the unit clean.
To prevent damage to the touchscreen, use only your finger or the stylus
(pen) supplied with your Omnii.
