D-36
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Bar Code Symbologies – Descriptions
2D PDF-417
D.5.23 2D PDF-417
Enabled
Set this parameter to
on
to enable “2D PDF-417”.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
1 to 2750.
D.5.24 2D Micro PDF-417
Enabled
Set this parameter to
on
to enable “2D Micro PDF-417”.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
1 to 366.
D.5.25 Code 16K
The “Code 16K” bar code is a multiple-row bar code that can encode the full ASCII charac-
ter set below ASCII 128. It uses existing UPC and Code 128 character set patterns. Up to 77
full ASCII characters or 154 numeric characters can be encoded into 2 to 16 rows. Each row
is divided by a separator bar. The top and bottom of the symbol also have separator bars that
extend to the ends of the minimum quiet zones.
Enabled
Set this parameter to
on
to enable “Code 16K”.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
1 to 160.
D.5.26 Code 49
The “Code 49” bar code is a multiple-row bar code that can encode the full ASCII character
set below ASCII 128. Up to 49 alphanumeric characters or 81 numeric characters can be
