D-30
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Bar Code Symbologies – Descriptions
UPC-E Settings
D.5.8
UPC-E Settings
Enabled
Set this parameter to
on
to enable “UPC E”.
Enabled UPC-E1
Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.
Expand
This parameter expands the UPC-E code to a 12 digit UPC-A format.
Check Digit Strip
If you enable this parameter, a check digit is stripped from the decoded bar code data.
Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Supplements 2 and Supplements 5
Supplements
are additions to EAN/UPC codes. These addendums can be 2 or 5 characters in
length. Usually, data from an addendum is a suffix to the main symbol output data.
Mandatory Enabled
When this parameter is set to
on
, the imager does not accept the main bar code without a
supplement.
Supplements Separator
Supplements Separator
is a space that is added between the UPC-E bar code and the Supple-
ment code/Addenda.
D.5.9
UPC/EAN Shared Settings
Extended Coupon Code
This parameter specifies whether or not the imager will read only UPC-A/EAN-13 bar
codes that have addenda.
Note: The 2 or 5 digit addenda must be turned on/off, depending on the desired behavior.
