Chapter 2: Basic Operation
Resetting Omnii
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
17
Warm Reset
To execute a warm reset:
• Press and hold down the [FN] key and the [ENTER/Power] key simultaneously for a
minimum of three seconds.
A warm reset closes open applications; any unsaved data are lost. Installed programs and
saved data are preserved.
Cold Reset
To execute a cold reset:
• Press and hold down the [SYM] key, the [FN] key, and the [ENTER/Power] key,
simultaneously for a minimum of six seconds.
Bootloader
To implement the bootloader:
• Press and hold down the [FN] key, the [ENTER/Power] key, and the [SCAN] key,
simultaneously for a minimum of six seconds.
After the cold reset, the BooSt menu appears.
• Type ‘
1
’ to “Run Main OS” (continue loading the Windows Embedded CE operating
system).
Hard Reset
To execute a hard reset:
•
Remove the battery.
Note: You do not need to reset your Omnii after configuring the radio.
Note: As part of the normal Windows Embedded CE cold boot process, the screen may go
blank for a few seconds after the splash screen loading bar reaches the end. The
desktop is displayed after a few moments.
Important: This reset returns Omnii to factory settings.
Important: This procedure is recommended as a last resort, when all other
methods fail.
