C-52
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Imager
2D Aztec
C.4.19 2D Aztec
Enabled
Set this parameter to
on
to enable “Aztec”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
C.4.20 Postal: PlaNET
Enabled
Set this parameter to
on
to enable “Postal: PlaNET”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
C.4.21 Postal: PostNET
Enabled
Set this parameter to
on
to enable “Postal: PostNET”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
C.4.22 Postal: Australian
Enabled
Set this parameter to
on
to enable “Postal: Australian”.
