C-40
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
TLC-39
C.3.20 TLC-39
Enabled
This composite component integrates MicroPDF417 with the linear Code 39 symbol.
Setting this parameter to
on
enables this parameter.
Linear Transmission Only
When
Linear Transmission Only
is enabled, only the linear portion of the composite bar
code is transmitted when scanned.
Security Level
This parameter is used to differentiate between TLC-39 and standard Code 39. Tapping on
Security Level
displays a dialog box in which you can assign a value from
0
to
100
. The
higher the value assigned, the lower the decode rate.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
C.3.21 PDF-417
Enabled
Set this parameter to
on
to enable “2D PDF-417”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
C.3.22 Micro PDF-417
Enabled
Set this parameter to
on
to enable “2D Micro PDF-417”.
