Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
C-35
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Code 11
Plessy Minimum Length
Minimum lengths for the Plessy bar code can be set from
0
to
255
. The length of a code
refers to the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
C.3.13 Code 11
Enabled
Set this parameter to
on
to enable “Code 11”.
Check Digit Verification
The available options for this parameter are
MOD 10 Check
and
Double MOD 10
Check
.This parameter uses the specified algorithm of the option you've chosen to ensure the
integrity of the symbol data before transmitting. If the data does not contain that algorithm,
the data is not transmitted.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from
0
to
255
. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
C.3.14 Interleaved 2 of 5
Enabled
Set this parameter to
on
to enable “Interleaved 2 of 5”.
