C-32
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Code 93
Addendum
An addendum is a separate bar code, supplementary to the main bar code. This parameter
provides two options:
Not Required but Transmitted if Read
or
Required and Transmitted
.
•
Double-tap on
Addendum
to display a dialog box listing your options.
•
Highlight an item, and tap on
OK
.
When “Addendum” is set to
Not Required but Transmitted if Read
, the scanner searches for
an addendum and if one exists, appends it to the main bar code. When the parameter is set to
Required and Transmitted
, the scanner does not accept the main bar code without
an addendum.
Addendum Add-on 2 and Addendum Add-on 5
Enabling these parameters sets the length of the addendum bar code to either 2 or
5 characters.
Addendum Security
If you tap on “Addendum Security”, a dialog box is displayed in which you can define the
security level of add-on 2 or add-on 5 with a value from
0
to
100
. As security levels in-
crease, the scanner decode speed decreases.
GTIN Compliant
GTIN (global trade item number) processing transmits EAN 128 as the 14-character
EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology.
Reading Range
This parameter determines the reading distance from which a bar code can be successfully
scanned. The default setting,
Extended
, allows for increased reading distance.
C.3.10 Code 93
Enabled
Set this parameter to
on
to enable “Code 93”.
Important: When EAN 128 and GTIN processing are both activated, it is not possible
to read normal EAN 128 Codes.
