Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
C-29
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Code 128
Enable ISBT 128
To successfully scan this type of bar code (International Society of Blood Transfusion), this
option must be set to
on
. If you enable this type of bar code, Code 128/EAN 128 is deacti-
vated to avoid any confusion.
ISBT Concat Transmit
The codes are not concatenated by default. You need to choose one of the options provided
for this parameter to send concatenated code. Choosing
Only Concatenated Codes
transmits
only concatenated codes—single codes will not be transmitted. Choosing
Concatenated or
Single
transmits single codes or concatenated codes. If only one code of a pair is read, that
code will be transmitted as a single code. If both codes in a pair are detected, they will be
concatenated provided that “ISBT Concat Any Pair” (see below) is enabled.
ISBT Concat Any Pair
Enabling this parameter causes all code pairs that can be, to be concatenated even if they do
not comply with Section 4.1 of the “ISBT 128 Bar Code Symbology and Application Speci-
fication for Labeling of Whole Blood and Blood Components” (June 2000, Version 1.2.1).
Reading Range
Determines the reading distance from which a bar code can be successfully scanned. The
default setting,
Extended
, allows for increased reading distance.
Check Digit Verification
The available options for this parameter are
Disabled
or
French CIP
. This parameter uses
the specified algorithm of the option you've chosen to ensure the integrity of the symbol data
before transmitting. If the data does not contain that algorithm, the data is not transmitted.
Minimum Length
Minimum lengths for the bar code can be set from
0
to
255
. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
Note: French CIP (French pharmaceutical) is only used with bar codes containing
7 characters.
