C-20
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
MSI Plessey
that falls within a specified range (e.g. between
10
and
15
characters). The minimum and
maximum values for the range are
5
and
55
, respectively.
CLSI Editing
When enabled, this parameter strips the start and stop characters and inserts a space after the
first, fifth, and tenth characters of a 14-character Codabar symbol.
NOTIS Editing
When enabled, this parameter strips the start and stop characters from decoded
Codabar symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
C.2.14 MSI Plessey
Enabled
Set this parameter to
on
to enable “MSI Plessey”.
Set Length L1 and Set Length L2
Lengths for “MSI Plessey” can be set for
Any length, Length within a range, One discrete
length
or
Two discrete lengths
. The length of a code refers to the number of characters (i.e.,
human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled
Set Code Lengths
where
you can define the code length that will be recognized by your scanner.
Choosing
One discrete length
allows you to decode only those bar codes of a specified
length. Choosing
Two discrete lengths
allows you to specify two lengths of bar codes that
may be decoded.
Length within a range
allows you to decode any bar code with a length
that falls within a specified range (e.g. between
10
and
15
characters). The minimum and
maximum values for the range are
6
and
55
, respectively.
Note: Symbol length does not include start and stop characters.