Chapter 6: Peripheral Devices & Accessories
Battery Charger (6-Slot) - Model No. ST3006
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
185
6.7.5.4 Spare battery LED is red with a battery installed.
•
Try inserting a battery that is known to be working with another charger.
•
If the charge slot LED continues to show red with the known working battery, the
charger is defective and requires service.
•
Your Psion Teklogix battery and desktop docking station are carefully designed for
safety and capacity performance in accordance with IEEE 1725. If the battery or
charger are not Psion Teklogix approved products, or the safety mechanism is faulty, the
spare charge slot LED or the Omnii LED will display red.
6.7.5.5 Spare battery LED does not turn on when a battery is installed.
•
Inspect the charge slot contacts for damage (are they bent, flattened, twisted or
broken?).
•
Reinstall the battery and check that it is fully seated in the slot.
•
Try inserting a battery that you know to be working into the charger slot.
•
Disconnect and reconnect the DC adaptor, and check that the spare battery LED indica-
tor flashes at power-up.
•
If the charge slot fails to charge the known working battery, it is defective and
requires service.
6.8
Battery Charger (6-Slot) - Model No. ST3006
The ST3006 is designed to charge up to six Omnii lithium-ion batteries at one time.
Figure 6.10 ST3006 Battery Charger
Important: Keep in mind when ordering a charger, you must also order an IEC-320 C13
power cord separately.
