Chapter 5: Configuration
Total Recall
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
159
Trigger On Sequence And Trigger Off Sequence
If a SICK scanner connected to an Omnii port requires a serial stream of data bytes to trigger
the scanner
on
and another to trigger the scanner
off
, the
Trigger On Sequence
and
Trigger
Off Sequence
parameters allow you to define these serial streams.
Double-tapping on
Trigger On Sequence
or
Trigger Off Sequence
displays a screen with a
hex array of 10 elements.
These parameters work in conjunction with
Manage Triggers
sending on and off data
streams to the trigger module you assigned. For example, suppose you launch
Manage Trig-
gers
and choose
Decoded Scanner
as the ‘module to trigger’. Next, you assign a ‘trigger
key’—for this example, . (period). To define the serial stream of data bytes to control the
on
and
off
function of the ‘trigger key’, enter a hex value in the
Trigger On Sequence
and the
Trigger Off Sequence
fields. When you press the trigger key, the
Trigger On Sequence
is
sent and when you release the trigger key, the
Trigger Off Sequence
is sent, turning the
trigger key
on
and
off
.
5.13
Total Recall
Total Recall
is a Psion Teklogix utility developed to maintain applications and settings
during a cold boot, and clone settings to other devices. This utility is based on a backup and
restore concept.
•
In the
Control Panel
, choose the
Total Recall
icon.
