Chapter 5: Configuration
Teklogix Scanners
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
149
5.12
Teklogix Scanners
The
Teklogix Scanners
icon in the
Control Panel
provides dialog boxes in which you can
tailor bar code scanner configuration and choose the bar codes your scanner will recognize.
The parameters are preset with the default settings of the decoded scanner installed in
the unit.
For a listing of available scanners and their specifications, please refer to Chapter 7:
“Specifications”.
Note: To enable a newly-installed scanner, press and hold down the [FN] key and the
[ENTER/Power] key simultaneously for a minimum of three seconds.
