Chapter 5: Configuration
Teklogix Imagers
148
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
• Whether to perform a quick format. Quick formatting removes all reference to data in
the partition without erasing the actual partition. The partition will be treated as
empty, and new data will overwrite it.
6. Tap
Start
. The partition is formatted.
To mount a partition:
1. Choose the desired partition.
2. Tap the
Properties
button. The
Partition Properties
dialog appears.
3. Tap the
Mount
button. The partition is mounted. The asterisk appears next to its
name in the partitions list.
The Partition Properties dialog has buttons for additional functions. Partitions can be defrag-
mented, and their file structure can be scanned.
5.11
Teklogix Imagers
The Teklogix Imagers applet is used to create, modify, delete, and activate imager settings.
The principle uses of the applet are to decode bar codes and to capture images. A
Demon-
stration Application
is provided to demonstrate how the imager works. Refer to “Demo” on
page 65 for details.
Refer to Appendix D: “Teklogix Imagers Applet” for configuration details.
To launch this applet:
•
In the
Control Panel
, choose the
Teklogix Imagers
icon.
Note: This icon is only displayed when the appropriate imager is installed in your Omnii.
If there is an imager installed but this icon is not present, additional software (ICS)
may need to be installed.
To enable a newly-installed imager, Press and hold down the [FN] key and the
[ENTER/Power] key simultaneously for a minimum of three seconds.
