PSI Woodworking Products
CSC2000C Barracuda Chuck
4-Jaw Self-Centering
Chuck System
Product CSC2000C
The Ideal Chuck for Midi and Full Size Woodworking Lathes
Warranty
Thank you for purchasing one of PSI’s growing family of woodworking products. The #CSC2000C is engineered and manufactured to the highest standards of quality. You
will find this product an essential accessory to your workshop.
This product is warranted against defects in material and workmanship for a period of two years for all components. This warranty applies to the original purchaser of
the product and is limited to the repair and/or replacement of the product, or its parts at the discretion of PSI Woodworking Products. Excluded are parts which have
been misused, abused, altered, or consumed by normal operation of the chuck. Also excluded are direct or consequential damages to persons, properties, or materials.
Your invoice serves as proof of purchase and must be referenced to authorize any warranty repair. Call your PSI dealer for proper authorization.
Safety Instructions for Chuck System #CSC2000C
1. Do not wear gloves or loose clothing when turning
2. Do not wrap any strip sandpaper or clothing around your hands or fingers when sanding or turning.
3. Use proper eye protection when turning.
4. Check your wood for splits, weakness or cracking prior to mounting on the chuck.
5. Confirm that the wood is tightly gripped before turning your chuck under power.
6. Rotate the chuck manually prior to starting your lathe to confirm proper clearance.
7. Always check and re-tighten after any problem or catch.
8. Use appropriate speeds as referenced in instructions.
9. Always turn with sharp lathe chisels.
10. Capture fine particles from the air with a dust collector.
Package Contents
A. CSC2000C Barracuda chuck
B. Tightening levers (2 each)
C. Hex wrench
D. 1 set (4 pieces) of #2 round jaws (mounted to chuck)
E. Screw chuck
F. 1" x 8tpi adapter (pre-mounted to chuck, not shown)
G. 3/4" x 16tpi adapter
D
A
B
C
1
3
2
E
G
Additional Jaws (included)
1. #1 Step Jaws
2. #3 Round Jaws
3. Pin Jaws
Flat Jaws sold separately
