PSC PT Program Generator, User Manual, Page: 83 / 204

Creating New Nodes
User’s Guide
71
Operand 2 Tab
The
Operand 2
tab lets you specify a constant value or a file or register con-
taining the second operand for the mathematical operation. The location of
Operand 2
is displayed near the bottom of the dialog.
Figure 47. Math Node: Operand 2 Tab
For more information on files and registers, refer to
Registers on page 78
and
Files on page 81
.
Result Tab
Register/File
specifies where the result of the math operation is stored—in
either a field, register, or file. The location where the result of the mathemati-
cal operation is stored is displayed near the bottom of the dialog.
Figure 48. Math Node: Result Tab
For more information, refer to
Using a Register as a Destination on page 79
, and
Using a File as a Destination on page 83
.
2342.book Page 71 Thursday, July 22, 2004 8:35 AM