manualshive.com logo in svg

PSC PT Program Generator, User Manual, Page: 42 / 204

Share
Download
PSC PT Program Generator User Manual Download Page 42

The PPG Menubar

30

PT Program Generator (PPG)  v5.0

3. Select 

OK

 to save your settings. This opens the dialog shown in 

Figure 13 on page 31

.

Appearance

You can change the appearance of nodes with these fields.

Font

Press the 

Font

 

Select

 button to open the 

Font 

dialog box shown 

in 

Figure 12

 to change the font and size displayed in the flow chart.

Figure 12. Font Dialog Box

Your font changes affect all text in the flow chart, not just the selected node or frame. 
All objects in the current flow chart are affected immediately. Corresponding settings 
for previously-created applications will not be changed.

Node Type

Default width / height for nodes and grids are displayed in pixels

Width

Height

Function

100

25

Operation

80

38

Width

 and 

Height

 indicate the number of pixels between points. 

If some of the text in flow chart nodes is being cut off, you can either increase the node 
size or decrease the font size. 

2342.book  Page 30  Thursday, July 22, 2004  8:35 AM

Summary of Contents for PT Program Generator













































































































































































































Reviews:

No comments