manualshive.com logo in svg

PSC PT Program Generator, User Manual, Page: 175 / 204

Share
Download
PSC PT Program Generator User Manual Download Page 175

User’s Guide

        

                   163

Appendix D

PPG System Commands

Overview

To use PPG to reset the default settings on the PDT, enter the human readable 
portion of these bar codes at the system command prompt. This is useful to 
automatically change modes for the user. The following bar codes are provided 
in this section:

•

Using Predefined Defaults on page 164

.

•

Alternate Parameters on page 165

.

Additional setting bar codes are provided in the 

Programming

 chapter in the 

PSC 

Falcon PT40 Product Reference Guide

. Enter the human readable portion at 

the system command prompt in the 

Output

 node 

Properties

 dialog.

Figure 130. System Command Field in the Output Node 

2342.book  Page 163  Thursday, July 22, 2004  8:35 AM

Summary of Contents for PT Program Generator













































































































































































































Reviews:

No comments