PSC PT Program Generator, User Manual, Page: 134 / 204

PPG Tutorial
122
PT Program Generator (PPG) v5.0
The Menu: Confirmation Node
Complete the following steps to set up this node:
1. Double-click on the
Menu: Confirmation
node to open its dialog, and
enter the text shown in
Figure 95
. Leave the second line blank.
Figure 95. The Menu: Confirmation Dialog
2. Enable the
<F3>
checkbox. Select
Output to PC
in the
Next Node
column to begin data output when the user presses
<F3>
.
3. Select the
<F4>
checkbox, and select
Exit Main Menu
from the
pull-down list. This will redisplay the
Main Menu
when the user
presses
<F4>
.
4. Press
OK
to save your settings and exit the dialog box.
The Output: to PC Node
Complete the following steps to set up this node:
1. Select the
Output: to PC
node to open its dialog (refer to
Figure 96 on
page 123
).
2. On the
Information to Output
tab, select the
Serial
setting for
Output
To Device
. This will send the output to the serial port of the portable,
which should be connected to the serial port of the PC.
When creating the Links from the
Output: to PC
node, create the Link to the
Output:
Error Beep
node first. This Link will be selected for the
Next Node/On Error
option.
2342.book Page 122 Thursday, July 22, 2004 8:35 AM