Building a Custom Portable Program
User’s Guide
119
The Output: Error Beep Node
Now you need to set the
Output
node to sound a beep. Complete the follow-
ing steps:
1. Double-click the
Output: Error Beep
node to display its dialog box.
Figure 91. The Output: Error Beep Dialog Box
2. On the
Information to Output
tab, select
System
as the
Output To
setting and
Constant
as the
Data
Source
setting.
•
In the constant field, enter the characters
.+
(period and plus).
This is the command to sound a high beep.
•
Or enter
.–
to sound a low beep.)
3. Press
OK
to save your settings and exit the dialog box.
The Display: Error Text Node
You can have a special message appear when the error beep is sounded.
Double-click on the
Display: Error Text
node, enter the text shown in
,
and press
OK
.
Figure 92. The Display: Error Text Dialog Box
2342.book Page 119 Thursday, July 22, 2004 8:35 AM