PSC Falcon PT40, Product Reference Manual

Page: 13 / 122

The Keypad
Product Reference Guide
1-3
Resetting the PT40
Sometimes you will need to reset the PT40. Both Soft Reset and Hard Reset
return the PT40 to the opening display screen (refer to
Figure 1-1 on page 1-2
)
and return a unique series of beeps and tones to verify the reset.
Soft Reset:
Use a soft reset to reboot a PT40 when there is power available.
Scan the following reset bar code:
Hard Reset:
Use a hard reset to reboot a PT40 without power.
1. Remove the main battery or external power supply.
2. Press and hold the
<CLR>
and
<ENT>
keys while reinserting the main
battery or reconnecting the power supply.
The Keypad
The keypad on the PT40 has three types of keys: action keys, function keys,
and data keys. Each key produces a beep when pressed.
• Refer to
Figure 1-2 on page 1-4
for an illustration of the Falcon PT40.
• Refer to
Table 1-1 on page 1-5
for a list of data keys and cycles.
• Refer to
Table 1-2 on page 1-5
for a list of action keys and functions.
CAUTION
Resetting the PT40 is similar to pressing
<Ctrl>+<Alt>+<Delete>
on a PC. All data
stored in the portable’s memory is cleared.
Reset
* + . *
2340.book Page 3 Wednesday, January 29, 2003 12:50 PM