PSC Scanning Imager 8000, On-Screen Programming And Viewing Manual

Page: 15 / 88

R44-2080
9
View
Use the View pull-down menu, shown in Figure 4, to select the fol-
lowing options:
Figure 4. View Menu
ASCII To Hex Conversion [Default = No Conversion] — Use this
option to control the conversion of any data sent to Com-
mand Text Display and the Receive Data Window. When a
character is converted, it is converted to the form ‘<xx>,’
where xx is a hexadecimal code for the character.
Convert Unprintable ASCII Data (Except CR/LF) — all unprintable
characters, except carriage returns and line feeds, will be con-
verted to the hexadecimal format.
Convert Unprintable ASCII Data — All unprintable characters are
converted to the hexadecimal format.
Convert All ASCII Data — All characters are converted to hexa-
decimal.
Display AGC Bytes — Selecting this option causes the image expo-
sure data to display in the Received Data Window. When the
image is set, click again to turn off this option.
Configure Shortcut (Function) Key
— Allows you to define custom
shortcut keys for your most used OSPV commands. There are
eleven function keys (F1 to F11) which may be configured to
directly execute commands. At program startup, only the
first five function keys are mapped as follows; the remaining
keys are unassigned:
F1 — Reset To Defaults
F2 — Display System Configuration
F3 — Display Decoder Configuration