PSC Scanning Imager 8000, On-Screen Programming And Viewing Manual

Page: 34 / 88

28
Imager 8000 2D Handheld Reader
Symbology Configuration
These fields control how symbols are captured and decoded and how
the decoded data is sent to the host system. The following symbolo-
gies are supported:
1-D Symbologies
Codabar, Code 128, Code 39, Code 93, EAN-8, EAN-13, UPC-A, UPC-
E, Interleaved 2 of 5, and Reduced Space Symbology (RSS).
2D Symbologies
Matrix — Data Matrix, Maxicode (modes 0 to 6)
Stacked —
PDF417
QR Code — QR
Other Symbologies
Postal Symbols — US Postnet, US Planet, Australian Postal, and Japan
Postal.
Composite Symbols — RSS-14 Composite, and UCC-28 Composite.
Edit Format
Edit Format applies to all symbologies and affects how the decoded
data is transmitted to the host.
Data Editing
[Default = ‘%D%’]. Along with the generic pream-
ble and postamble, and the symbolic specific AIM
1
- ID,
you can also edit decoded data uniquely for each sym-
bology. This feature gives you the ability to format and
edit the actual decoded data. Refer to
Output on page 45
for more information on preamble, postamble, and AIM-
ID.
Format controls consist of literals and data edit specifiers.
ASCII characters that are not enclosed within the percent
signs (%) are literals and will be added to the output data
as is. Literals may include all ASCII characters, and may
precede or follow data.
Decoded data edit specifiers are ASCII characters that
specify how data from the captured bar code, or 2D sym-
bol is added to the output data to the host.
1. AIM is the worldwide authority on automatic Identification, date collection, and networking
in a mobile environment. For more information visit to their web site at
aimglobal.org .