PS Engineering Inc. ®
PAC15EX Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-015-0000
Page 1-2
New, Oct. 2012
1.5
SPECIFICATIONS
DIMENSIONS:
Height: 1.3 in. (3.3 cm) Width: 6.25 in. (16.9 cm)
Depth behind panel 7.15 in. (18.16 cm)
WEIGHT
PAC15EX Unit
Rack with connectors
1.34 lb. (0.61 kg)
0.51 lb. (0.24 kg)
AUDIO CONTROLLER POWER REQUIREMENTS
(Including Internal Lighting):
Voltage
:
11-33 VDC
Maximum Current
:
2.5 Amp (Externally protected by a 3A pull-type
breaker)
Audio Controller Specifications
Audio selector panel input impedance
:
510
Input Isolation
:
-60 dB (min.)
Receiver Inputs
:
4 (Com 1, Com 2, Aux 1, Aux 2)
Unswitched Inputs
:
4
Transmitter Selections
:
3 (Com 1, Com 2,
Com1/2)
Headphone Impedance
:
150 – 1000
Headphone Output
:
38 mW each headset, no clipping <1% THD typi-
cal
into 150
Microphone Impedance
:
150 - 600
Intercom Specifications
Intercom Positions
:
4 places (with individual
Intelli
Vox® circuits)
Music Inputs
:
2, (Independent, Stereo)
Music Muting
:
>-30 dB "Soft Mute" when Com or intercom active.
Distortion:
<1% THD @ 38 mW into 150
Mic Freq. Response, 3 dB:
300 Hz - 6000 Hz
Music Freq. Response, 3 dB
:
10 Hz – 26 kHz
1.6
EQUIPMENT SUPPLIED
1 ea. of the following items:
Model
Description
Part Number
PAC15EX
PAC15EX Remote-mounted Audio Controller with intercom
050-015-0100
Installation Kit: 250-015-0000, containing:
Description
Quantity
Part Number
PAC15EX installation rack assembly
1
430-890-0040
PAC15EX Rack back plate
1
430-890-0050
44-pin connector kit
2
120-891-2045
Backshell, connector
2
625-025-2465
Backshell Retainer
2
431-891-0100
4 40 X 7/16 screw w/nylon patch
4
475-440-0007
4 40 X 3/8 screw w/lock washer
4
475-440-1038
4 40 X 1/8 screw w/lock washer
2
475-440-0001
Solder Lug
2
475-009-0001
Cable Clamp
1
625-001-0002
#6-32 x ½” Flat head Philips screw
6
475-632-0012
#6-32 Clip Nut
6
475-630-0002
PAC15EX Horizontal Mounting Flange
2
430-200-0042
PAC15EX Vertical Mounting Bracket
1
430-200-0070
