Prysmian PCH-0001, User Manual

Page: 24 / 27

24
4.4. Switching to professional mode, reset and restart
The device is equipped with a single button that allows several
different functions based on the duration of its pressure:
1 – 4 sec: restart
>5 sec: switch to Professional mode and activate the Access Point
(press until the device LED starts flashing violet)
4.5. Deactivation
DANGER
Danger of death from electrocution
Potentially lethal voltages are present in live components.
• Switch off the voltage at the connection point and secure it
against reactivation.
• Make sure that all conductors to be connected are voltage -free.
Disassembly sequence:
• After turning off the system, disconne ct all cables connected to the
device.
• Remove the device from the DIN rail by lifting the upper tab .
5. Accessories
2 x Cable Prysmian section 6
𝑚𝑚
2
, length 300mm
(red, blue)
1 x Cavo di section 0,5 𝑚𝑚
2
, length 1m (yellow/green)
1 x Instruction manual