is loaded properly, you can choose the “Yes” option and the printing will continue with
a new color.
3.
“Color not clear”
Filament was loaded but the color is still mixed with the previous
filament. Press the button with this option and the printer will extrude more filament
from the nozzle. When the color is pure without any remains of the previous filament
you can choose the “Yes” option and the printing will continue with a new color.
After confirming, printer returns to the original position and continues to print.
Other options for
multicolored print
is to
use the filament change option. Choose
the
Tune
and then
Change filament
option during the print. Printer will pause the
printing process, unload the filament and signals you to insert the new filament. The
procedure is the same as above.
You should always use the same material or combine materials with similar print
temperatures and settings.
10.7 Printing of non-standard models
Slic3r helps you while printing the non-standard models as models with overhangs and/or
models larger than a printing bed.
10.7.1 Printing with support material
When you print models you can find special cases different from standard printing. The first
case is printing with support material.
If you print an object with a gradient lower than 45° the material overhang would be
preventing the object to be printed correctly. Slic3r allows you to print such objects thanks to
the ‘Printing with support’ function. Support material is an extra structure printed as
scaffolding for the object - you can remove the support material after the printing is finished.
Choose the
Print Settings
tab
(1)
and click the
Support Material
option
(2)
in left column.
First you have to check the
Generate support material
box
(3)
. Next item -
Overhang
threshold
(4)
lets you set the minimal angle for printing the support material. Setting this item
to zero lets the printer detect problematic parts automatically and print support where it’s
needed.
47
Summary of Contents for Original Prusa i3 MK2S 1.75mm
Page 1: ......
Page 25: ...Pict 11 Probe response diagram Now you are done 25 ...
Page 61: ...Pict 35 Nozzle change 61 ...
