EN
9
8
EN
• Always unplug the appliance by the cable plug and
never by the cable itself, to prevent short circuit, ca-
ble damage, electric shock or fire.
• Make sure to unplug the appliance if any of the fol-
lowing occurs:
∙
The appliance does not work.
∙
The USB power cable or plug is abnormally hot.
∙
A peculiar smell, noise or vibration is detected.
∙
Any other abnormality or failure.
User Manual
PACKAGE CONTENTS
• 1 × Prozis Breaze Mini Air Filter
• 1 × USB Power Cable
• 1 × Quick Guide
PRODUCT DESCRIPTION: SEE PAGE 2
1. On/off button
2. Status indicator
3. Control panel
4. DC5V in
5. Activated carbon filter
6. HEPA filter
7. Back cover
CLEANING AND MAINTENANCE
• Switch the product off and remove all plugs before cleaning!
• When cleaning the components, do not use aggressive or abrasive cleaning agents or
materials such as scouring milk or steel wool. These could damage the surface of the
appliance!
• Protect the motor unit from water drops and water spray.
• Only use a clean, dry cloth to clean the motor unit, and never any corrosive liquids. Use a
slightly damp cloth and a mild cleaning agent to remove stubborn dirt.
• Make sure no moisture enters the product during cleaning, to prevent damage to the
product and related repairs.
STORAGE
• Allow the device to cool down completely before storing it.
• When no longer using the device, store it in a dry environment, protected from dust and
direct sunlight.
• Store your device inside the original case provided.
INSTRUCTIONS
How to use:
• Connect the appliance to a power supply using the included USB cable.
• Once powered, use the button to turn the device on and off.
• It is recommended to replace both the activated carbon filter and the HEPA filter after 3-6
months of use. Do this as follows:
∙ Open the back cover.
∙ Remove the old filters.
∙ Place the replacement filters in the correct order: the activated carbon filter first, then
the HEPA filter.
∙ Close the back cover. You can now continue using the air filter.
TROUBLESHOOTING
Some issues that arise may be solved by the user. If the problem persists after having tried
the following solutions, please contact Prozis customer service.
PROBLEM
CAUSE
SOLUTION
The power indicator light is off.
The power connection is faulty.
Check the power cable and the device input for
defects. You can also try to use a different USB power
source, such as a PC.
The filter is not working
The device is in standby mode.
Press the function button to turn the filter on.
The button does not respond
to my touch.
There may be a power issue.
Check the power supply for any possible interference,
and reconnect the power.
The air does not seem to be
filtered properly.
Something is blocking the air
passage, or the filters have reached
the end of their lifetime.
Check if something is blocking the air inlet or outlet,
and if that is the case, remove it. If this does not solve
the problem, replace the filters by new ones.
Warranty statement
All electrical and electronic products commercialized by Prozis via www.prozis.com are cov-
ered by the warranty applicable to the purchase and sale of consumer goods.
GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis’ warranty for final consumers.
This warranty is valid exclusively for consumers who purchase the product for non-profession-
al purposes.