EN
7
6
EN
EN
7
User Manual
PACKAGE CONTENTS
• 1 × Atmo LED Clock
• 1 × USB cable
• 1 × Quick guide
CLEANING AND MAINTENANCE
• Switch the product off and remove all plugs before cleaning!
• When cleaning the components, do not use aggressive or abrasive cleaning agents or ma-
terials such as scouring milk or steel wool. These could damage the surface of the device!
• Only use a clean, dry cloth to clean the device, and never any corrosive liquids. Use a slight-
ly damp cloth and a mild cleaning agent to remove stubborn dirt.
• Make sure no moisture enters the product during cleaning, to prevent damage to the
product and related repairs.
STORAGE
• When no longer using the device, store it in a dry environment, away from dust and direct
sunlight.
• When not using the device for a long time period, make sure to keep recharging it on a
regular basis to maintain battery performance.
• Switch the device off when not using it for a long time period.
• Store your device in the original case provided.
Instructions
PRODUCT DESCRIPTION: SEE PAGE 2
1. Night light on/off
2. Display
3. Sleep function
4. Clock/alarm setting
5. Up
6. Down
7. On/off/energy saving mode switch
8. Charge indicator
9. Micro-USB port
BUTTON FUNCTIONS:
On/off/energy saving mode switch:
• When set to off , the clock is in standby mode, the night light is off, and none of the buttons
function.
• When set to on , the display is on and all buttons are operable.
• When set to energy saving mode, the display is off but the buttons work nevertheless.
Night light on/off:
• Short-pressing will turn the night light on and off.
• Long-pressing will enable stepless dimming.
• In energy saving mode , short pressing will turn the clock display on for 30 seconds. Dou-
ble-pressing will turn on the night light.
Sleep function button:
• Short-press to switch the year-month-day-time display.
• Long-press to enter sleep mode (see Actions / Sleep function ).
Clock/alarm setting:
• Short-press to set the alarm
• Long-press to set the date and time
Up:
• Long-press 2 seconds to switch between 12-hour and 24-hour display.
• When setting clock, date or alarm: short-press to increase value step-wise, long-press to
increase quickly.
Down:
• When setting clock, date or alarm: short-press to decrease value step-wise, long-press to
decrease quickly.
ACTIONS:
Charging:
• Connect the device to an adequate power source using the provided USB cable. The
charge indicator will light up in red while charging, and will turn itself off once fully
charged.
• The message
Lo
on the display means that the device is low on power and requires
immediate recharging, to prevent the battery from becoming fully drained and the clock
from being reset.
Setting the time:
1.
Long-press the
Clock/alarm setting
button, and a sound will play when you
enter setting mode.
2.
Set the year using the
Up
and
Down
buttons. When ready, short-
press
Clock/alarm setting
to proceed with setting the month. Repeat this process
to set the right day, hour and minute.
3.
After setting the minute, press
Clock/alarm setting
one last time to exit setting
mode.
