background image

User Manual 

Page 20 

Version 05 

13.6

 

Training recommendation 

 
Before carrying out the training program, the patient should warm-up on the arm-crank or bicycle ergometer to 
prepare the muscle groups involved for the load by stretching exercises. 
 
The training exercises should always be carried out painlessly. Of any discomfort occurs the training should be 
stopped immediately. In this case a doctor or therapist is to be consulted. 
 
There are different ways to use the muscles. The load on the muscles when training is concentric and eccentric and 
when using the proxotrain tergumed

®

 software module also isometric. 

The intensity is based on the symptoms of the patient, his/her load capacity and the rehabilitation phase in which 
he/she is in. Depending on the aim of training the training of special capabilities, such as power endurance and 
maximal power of the muscles is a priority.  
 
The intensity at the start of training should be deliberately selected to be light. The load is then increased gradually, 
to avoid excessive loads, which can lead to problems and pain with patients. 

 

14

 

Guarantee 

The basis are the Terms and Conditions from proxomed for warranty, as far as no other agreement has been made. 
Our general Terms and Conditions of sale and terms of payment in the respective current version can be viewed on 
our website:  

http://www.proxomed.de/de/agb.php

 

Our guarantee conditions in the respective current version can be viewed on our website:  

http://www.proxomed.de/de/garantiebedingungen.php

 

 

Warranty is void if changes are made to the equipment without expressed permission or carried out by 
unauthorised personnel. Once a warranty condition occurs, you should contact the service hot line by calling 
proxomed under: 

-

 

Telephone no. + 49 (6023) 9168 77  

-

 

Email address[email protected] 

-

 

Fax 49 (6023) 916871. 

proxomed

 will initiate service immediately and will be carried out at their discretion. The following procedures are 

possible: 

1.

 

The service is carried out on site with our service. 

2.

 

We dispatch the desired spare part. 

3.

 

We dispatch an exchange machine. 

The client should return the defective parts to us within 48 hours. Otherwise, the delivered spare part will be 
invoiced. 

If the cause is not within the warranty / guarantee guidelines, then proxomed reserves the right to invoice all repair 
costs.  

Consumable parts are not subject to warranty and guarantee. These are in particular padding fabrics, padding, 
rubber grip on the handles, footrests, Bowden cables, and pneumatic compression springs. 

The resulting time spent by our service also in the warranty period is to be reimbursed by the clients. Ensuring the 
functionality of the machine by early replacement of consumable parts is up to the client, if the intervals for safety 
checks set down by proxomed are not complied with or if no maintenance contract has been made with proxomed. 

 

 

Summary of Contents for 10350100



























Reviews: