manualshive.com logo in svg

Proximus Forum Phone 516, User Manual, Page: 136 / 156

Share
Download
Proximus Forum Phone 516 User Manual Download Page 136

Programming Keys

134

Features and MenuCards

Deleting a programmed key

Programming Functions (Features) 

You can also store Main menu functions on programmable keys (see 

Main 

Menu

 starting on page 106). 

Long

 press the key and you will see the feature 

key’s MenuCard with the name of the function in the first line (e. g. call 
forwarding). You can change the function as required (e. g. change the 
destination of the call forwarding). 

Note:

Some functions are displayed only, if the user group that is 
assigned to the telephone’s user has the corresponding authori-
sations. Example: An “Intercom protection” feature key is 
programmable only, if the 

Intercom protection

 access right is 

granted for the user group.

Switching functions on/off

The functions assigned to a key can be activated by a 

short

 press on the key or 

switched on and off by pressing the key (e. g. call forwarding). The function 
assigned to a key is active (switched on) when the key’s LED lights up. If the 
programmed function conflicts with your terminal’s current settings, a menu 
will open when you press the relevant feature key. You can use this menu to 
activate or deactivate the function again.

The following examples will help to explain this.

Example 1 “forwarding MSN groups”

If you have assigned an MSN group to a feature key, the LED lights up if all 
MSNs in the group are forwarded to the destination number specified. If a 
single MSN is forwarded to a different number or not forwarded, the LED 
does not light up. 
If you now press the feature key, a menu opens in which you can activate or 
deactivate the function again. The destination numbers for the individual 
MSNs of the group are overwritten and will have to be reprogrammed if 
required. Selecting 

On

 will forward all MSNs in the group to the originally 

g

Long

 press the programmable key, then …

P

select 

Delete key

.

 

O

Press the OK key.

Summary of Contents for Forum Phone 516





























































































































































Reviews:

No comments