manualshive.com logo in svg

Proximus forum 523, Mounting And Commissioning Manual

Share
Download
Proximus forum 523 Mounting And Commissioning Manual Download Page 77

Forum 523/524 in Computer Networks

Configuration Examples

75

Configuration Examples

Forum 523/524 in Computer 
Networks

One of the outstanding features of the Forum 523/524 is the integration of 
telephony and computer networks. Connect the Forum 523/524 via a 
computer network (LAN) with suitably configured workstations, and you can 
use its network features from these workstations. Using a Web browser you 
can access:

●

the Forum 523/524 Configurator

●

call charge administration

●

the das Forum CTI, with which telephone functions can be used on a PC

●

the Forum 523/524 central telephone book and your personal telephone 
book as well as to the company telephone book (if the multi-company 
variant is activated).

In addition, the Forum 523/524 can be used as an Internet access server. RAS 
access can also be implemented using the Forum 523/524, which enables the 
integration of external staff in the LAN.

In this chapter you will find several examples of configurations showing inte-
gration of the Forum 523/524 in a LAN. Which example applies to your situ-
ation depends on the size and properties of the existing or planned LAN 
infrastructure. 

Note:

Several menu entries mentioned in this chapter are available 
only, if you switch on the 

Level: Expert

 in the top level dialogue 

of the 

Configurator

.

Summary of Contents for forum 523





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands