Proximus forum 523, Mounting And Commissioning Manual

Page: 55 / 228

Port Assignment, Termination, Cable Length
Installation 53
Mail
If you are using an external mail system, it must be able to handle the number
of digits used for internal telephone numbers, e. g. five digits, if you have set
up the system to use 5-digit internal numbers.
The mail system can be connected to the internal a/b ports or to the internal
S
0
ports, but for both types of ports the mail system can send messages to
system terminals using code procedures:
* 6 8 Z
[Terminal]
0
: Message exists for this subscriber
* 6 8 Z
[Terminal]: No message exists (without trailing “0”).
Intercom System (for a/b)
The “Doorphone” intercom system can be connected to any a/b port. The
“Doorphone” module also provides the actor for the door opener contact.
Please observe the following points when connecting the door intercom
system:
● The “Doorphone” module should be set to its factory setting.
● In the Telephony : Ports : a/b : Change menu in the Configurator, select
Doorstation 2-wire as the Type . Deactivate the Actor option if you want
to use the Forum 523/524 actor port instead of the “Doorphone” relay to
open the door.
● The “Doorphone” intercom system has a number of bell keys to which you
can assign various call numbers in the Configurator under the menu item
Telephony : Ports : Doorbell .
● You can call the “Doorphone” intercom system by using the code procedure
* 1 0 2
.
● The “Doorphone” can be connected to any a/b port, but you can only
operate one “Doorphone” intercom system using Forum 523/524.
You will find more detailed information on installing and configuring the
“Doorphone” intercom system in the product’s user guide.
The intercom system should only be connected by a skilled electrician,
because sensor/actor contacts must be connected to the “Doorphone”
module.