Telephony Basic Settings
Factory Settings on Delivery
17
Factory Settings on Delivery
The following basic settings and features are active on delivery. We
recommend that you configure the Forum 523/524 communications system
to suit your individual requirements before using it (see
Note:
The basic settings apply to the smallest version of Forum 523/
524, i.e., without additional interface cards.
Telephony Basic Settings
●
The S
0
1 port is configured for multi-terminal access, the S
0
2 port for
system access.
●
The 3 U
pn
-ports are configured for Forum Phone 525 system telephones
with the call numbers 30 to 32.
●
The 4 a/b ports are configured for analogue devices with the call numbers
10 to 13.
●
The Forum 523/524 is configured ready for use in Belgium.
●
Analogue terminals: The dialling mode (IWV or MFV) is automatically
detected.
●
All corded terminals ring if there are incoming external calls.
●
The password for the “Administrator” user is empty.
●
The system PIN, for remote programmable call diversion for example, is set
at “0000”.
Authorisations
The allocation of authorities regulates which functions terminals on
Forum 523/524 can use. These authorities are configured for so-called user
groups, to which users and their terminals are then assigned.
Three user groups are preset: “Administrators”, “Standard” and “Guests”.
“Administrators” can access all functions in Forum 523/524 and have
unlimited configuration rights. Users in the “Guests” group can not configure
Forum 523/524, may not make any external calls and can only use a limited
Summary of Contents for forum 523
Page 1: ...Forum 523 524 Mounting and Commissioning Manual ...
Page 10: ...8 ...