manualshive.com logo in svg

Proximus Forum 500 Series, Mounting And Commissioning Manual

Share
Download
Proximus Forum 500 Series Mounting And Commissioning Manual Download Page 71

Gateway Configuration

Forum 5004/5008/5012 and Gateways

69

Operating a Gateway via Router

If the connection between the hardware units of the Forum 5004/5008/
5012 communications system is operated via a router, automatic 
configuration is not available. This is why you have to manually set the IP 
configuration for the gateways for the first-time commissioning. A hardware 
unit offers a minimum web console for doing so in the “Gateway” operation 
mode. Shortly after starting, this can be addressed via the fixed IP address 
192.168.99.253. 

1.

Switch the hardware unit installation switch to the “1 / Gateway general” 
position. If you activate the power supply later on for the hardware unit, 
you can address the web console of the gateway as long as the LED 4 is 
flashing red.

2.

If you wish to configure multiple gateways, avoid an IP address conflict as 
all gateways can be addressed under the same IP address shortly after 
starting. The following approaches are conceivable:

– Single port: Using an Ethernet line, establish a direct connection 
between the PC Ethernet port and the gateway Ethernet port. This avoids 
potential address conflicts.

– Connection via switch/company LAN: The PC and a gateway can also be 
indirectly connected via a switch or to the company LAN. Only switch on 
the respective gateway you wish to configure.

– Simultaneous connection via switch/company LAN: The PC and the 
gateways operated simultaneously on the LAN can also communicate if 
there is an IP address conflict. You have to manually assign the MAC 
address of the desired gateway on the PC.

3.

In order to be able to start the web interface of the gateway with a PC 
browser, the PC requires a suitable IP address configuration. Under 
Windows you have to log on as administrator and execute the following 
steps.

Summary of Contents for Forum 500 Series





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands