manualshive.com logo in svg

Proximus Forum 500 Series, Mounting And Commissioning Manual

Share
Download
Proximus Forum 500 Series Mounting And Commissioning Manual Download Page 26

LAN Settings / Internet Functions

24

Factory Settings on Delivery

LAN Settings / Internet Functions

This IP address configuration is activated in the unit’s factory and default 
settings:

●

Multiple e-mail account queries can be set up for every user. Every user 
with a system terminal can be automatically informed about incoming e-
mails with this function. Subject and sender of the e-mail will be 
displayed. The e-mail remains on the e-mail-server where it can be 
queried with a standard e-mail programme. 

●

You can change the IP settings in the 

Configurator

. Talk to the system 

administrator responsible for the existing LA N if you wish to do this.

Description

Setting

 Forum 5004/5008/5012’s IP 
address

192.168.99.254 (call server)
192.168.99.253 (gateway)

Forum 5004/5008/5012’s net 
mask

255.255.255.0

Forum 5004/5008/5012’s Host 
name

“host”

Forum 5004/5008/5012’s Domain 
name

“domain”

DHCP server

Active in “Static address assignment” 
mode

Net mask assigned via DHCP

255.255.255.0

Gateway assigned via DHCP

192.168.99.254

DNS server assigned via DHCP

192.168.99.254

Time-Server assigned via DHCP

192.168.99.254

Domain name assigned via DHCP

“domain”

Summary of Contents for Forum 500 Series





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands