Telephony Basic Settings
Factory Settings on Delivery
17
Factory Settings on Delivery
The following basic settings and features are active on delivery. We
recommend that you configure the Forum 5004/5008/5012
communications system to suit your individual requirements before using it
(see
Tip:
Notes on the functions listed below can be found in the glossary
(provided as a PDF file on the system CD).
Telephony Basic Settings
●
The Forum 5004/5008/5012 is configured ready for use in Belgium.
●
An inactive SIP trunk with the name “SIP” is configured. This SIP trunk is
bound to the “External trunk” route using the line seizure code “0”. For
external calls, you have to set up the SIP line.
●
The password for the “Administrator” user is empty.
●
The system PIN is set at “0000”.
Authorisations
The allocation of authorities regulates which functions terminals on
Forum 5004/5008/5012 can use. These authorities are configured for so-
called user groups, to which users and their terminals are then assigned.
Three user groups are preset: “Administrators”, “Standard” and “Guests”.
“Administrators” can access all functions in Forum 5004/5008/5012 and
have unlimited configuration rights. Users in the “Guests” group can not
configure Forum 5004/5008/5012, may not make any external calls and
can only use a limited range of Forum 5004/5008/5012 terminal functions.
The “Standard” user group is well suited as a starting point for creating user
groups for normal users of the system (e. g. the staff members of a company)
because of its default settings.
Note:
When the Forum 5004/5008/5012 is commissioned, all
connected terminals are initially in the “Administrators” group.
For more details on the configuration of user groups, refer to the
online help in the chapter entitled “User manager”.
