manualshive.com logo in svg

Proximus Forum 500 Series, Mounting And Commissioning Manual

Share
Download
Proximus Forum 500 Series Mounting And Commissioning Manual Download Page 171

SIP Telephony

Voice over IP (VoIP)

169

SIP System Telephones 

You can operate the Forum IPhone 512, Forum IPhone 545 and 
Forum IPhone 5010/5020/5025/5030/5040 SIP system telephones on 
the Forum 5004/5008/5012 communications system. The firmware of the 
communications system already includes the matching firmware files 
(Firmware addons, “*_fwaddons_*.cnt”) for the following SIP system 
telephones:

SIP system telephones

Model

Short description

Forum IPhone 512

Basic level version, display with 3 lines, 
8 programmable keys, 2 fixed line keys, 802.3af 
(PoE) power supply, two Ethernet ports for PC 
and LAN, separate 48 volts wall power supply 
available

Forum IPhone 545

Premium version with graphic touchscreen display, 
802.3af (PoE) power supply, two Gigabit-
Ethernet ports for PC and LAN, 11 softkeys on 5 
levels, 3 fixed line keys, up to 3 key extensions 
Forum 500 Keypad Paper or 3 key extensions 
Forum 500 Keypad Display

Forum IPhone 5010

●

Display: Monochrome LCD, 2.75" 
(128x48 pixels)

●

Hi-Q : Wideband handset and speaker-phone

●

Network ports: 2 Ports Fast Ethernet

●

PoE support: PoE Class 1, separate wall power 
supply available

●

Keys: 2 fixed line keys; 3 programmable keys, 
labelling via paper strip

Summary of Contents for Forum 500 Series





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands