Interfaces and Connectible Terminals
112
●
(external or internal) analogue modems,
(data transmission not possible via VoIP connections)
●
external voice mail systems,
●
external intercom systems.
Please note:
Observe the following notes on connecting analogue terminals.
Terminals which do not fulfil the technical requirements can
damage the Forum Gateway 560!
Analogue telephones
Only analogue telephones supporting pulse dialling (MFV) can be used.
Modems
The maximum transmission rate for analogue modems is 33.6 kbits/s
(V.34+). Analogue data transmission via VoIP audio connections is not
supported.
Voice mail
If you are using an external voice mail system, it must be capable of handling
the number of digits used for internal telephone numbers, e.g. five digits if
you have configured five-digit internal numbers.
The external voice mail system can be connected to internal a/b ports as well
as to internal S
0
ports. For both port types the voice mail system can activate
the notification for system terminals with the code procedures
* 6 8
resp.
# 6 8
.
Intercom system (for a/b)
The “Doorphone” intercom system can be connected to any a/b port. The
“Doorphone” module provides the actor for the door opener contact.
Observe the following when connecting:
●
The “Doorphone” should be set to its factory setting.
●
In the
Telephony
:
Ports
:
a/b
:
Change
menu in the
Configurator
, select
Doorstation 2-wire
under
Type
.
●
You can call the “Doorphone” intercom system by entering the code proce-
dures
* 1 0 2
to
* 1 0 9
(multiple “DoorLine” intercom systems
possible).